Compiling OpenSSL with MinGW

This article may require cleanup to meet the Qt Wiki's quality standards. Reason: Auto-imported from ExpressionEngine. Please improve this article if you can. Remove the {{cleanup}} tag and add this page to Updated pages list after it's clean.

Compiling OpenSSL with MinGW or MinGW-w64

Qt 5 / QtWebkit can make use of OpenSSL, which MinGW distributions do not ship.

Pre-built packages

The Win32OpenSSL project provides pre-compiled libraries for both 32 and 64 bit. However, these depend on the Microsoft Visual C++ 2008 runtime being installed.

Inside MSYS2 shell, pre-built openssl can be obtained from MSYS2 repo, with this command: pacman -S openssl

Compiling on your own

Requirements

• Either use MSYS, or use MSYS2 :
  • MSYS shell command prompt (an sh shell + some UNIX tools, get it from http://sourceforge.net/projects/mingw/files/MSYS/Base/msys-core/msys-1.0.11/MSYS-1.0.11.exe/download?use_mirror=garr. It's also an (optional) part of mingw.org installer). Install it in C:drive in "msys" folder.
  • MSYS2 shell command prompt, it can be obtained from https://msys2.github.io/ Install it in C:drive in "msys2" folder.
• Working MinGW, or MinGW-w64 toolchain:
  • Either get & load MinGW, or, get & load MinGW-w64 toolchains (from their respective project website), or, use "MinGW-w64" toolchains from MSYS2 repo, inside the MSYS2-shell.
  • NOTE: Do not use (or try to avoid using) different type of toolchains for building different sub-components for the same/main project, when targeted for same platform/OS. If you are using MinGW-w64 based toolchains from MSYS2\mingw32 or MSYS2\mingw64, then for main project & all sub-components, use same MSYS2 toolchains. If you are using MinGW toolchain, then for all of your sub-components & main project, use same MinGW toolchain. If you are using MinGW-w64 toolchains from "MinGW-builds", then for all sub-components & main project, use same MinGW-builds toolchains.

How to build

• Download latest+stable OpenSSL (You must use HTTPS secure encrypted connection to obtain source file) from https://www.openssl.org/source (e.g. openssl-1.0.1c.tar.gz)
• Either start MSYS-shell, or start MSYS2-shell:
  • Start a MSYS shell command prompt (C:.0\msys.bat)
  • Or, start MSYS2 shell command prompt (C:2\msys2_shell.bat)
    • See inside this MSYS2 page, how to prepare MSYS2 with build/compile related toolchains, tools & dependencies

• Extract source tar.gz using MSYS tar or MSYS2 tar (and ignore the symlink warnings)
  • don't use 7zip or other apps, since they fail to set up any symlinks! tar will also complain about symlinks, but compilation will still succeed.

• Unzip/decompress source:

$ tar xvzf openssl-1.0.1c.tar.gz
$ cd openssl-1.0.1c

• Check that gcc is in PATH, otherwise add it: change below command to match with your-side directory's exact name & letter-case & location:
  • If using MinGW-builds toolchain (which is usually located outside of MSYS or MSYS2), then execute this in MSYS or in MSYS2:

$ export PATH="/c/Mingw-builds/bin:$PATH"

• • If using MSYS shell, and if you have installed MinGW toolchain into C:32 directory, then execute this:

$ export PATH="/c/mingw32/bin:$PATH"

• • If using MSYS2 shell, execute this, if you are building for 32bit:

$ export PATH="/c/msys2/mingw32/bin:$PATH"

• • If using MSYS2 shell, execute this, if you are building for 64bit:

$ export PATH="/c/msys2/mingw64/bin:$PATH"

• for MinGW (32 bit) do:

$ ./Configure —prefix=$PWD/dist no-idea no-mdc2 no-rc5 shared mingw

• for MinGW-w64 do:

$ ./Configure —prefix=$PWD/dist no-idea no-mdc2 no-rc5 shared mingw64

• Compile & install:

$ make depend && make && make install

Errors

• If you run into

perl asm/sha1-x86_64.pl mingw64 > sha1-x86_64.s
gcc -I.. -I../.. -I../modes -I../asn1 -I../evp -I../../include -D_WINDLL -DOPENSSL_PIC -DOPENSSL_TH
READS -D_MT -DDSO_WIN32 -DL_ENDIAN -O3 -Wall -DWIN32_LEAN_AND_MEAN -DUNICODE -D_UNICODE -DOPENSSL_IA
32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_MONT5 -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM-
DSHA512_ASM -DMD5_ASM -DAES_ASM -DVPAES_ASM -DBSAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM -c -o sha1-x86_
64.o sha1-x86_64.s
sha1-x86_64.s: Assembler messages:
sha1-x86_64.s:1824: Warning: end of file not at end of a line; newline inserted
sha1-x86_64.s:2183: Error: number of operands mismatch for `rol'
make[2]: '''* [sha1-x86_64.o] Error 1
make[2]: Leaving directory `/d/dev/tmp/openssl-1.0.1c/crypto/sha'
make[1]:'''* [subdirs] Error 1
make[1]: Leaving directory `/d/dev/tmp/openssl-1.0.1c/crypto'
make: '''* [build_crypto] Error 1

check out http://openssl.6102.n7.nabble.com/Compile-error-with-MinGW-w64-td36657.html * Use perl inside MSYS or inside MSYS2 * or change crypto/perlasm/x86_64-xlate.pl as mentioned in the e-mail thread.

Using it

• If you are using cmd.exe (Cmd-shell), then: add the bin, include, lib folders to your compilation environment:

C:gt; set PATH=PATH;C:–1.0.1c\dist\bin
C:gt; set INCLUDE=INCLUDE;C:–1.0.1c\dist\include
C:gt; set LIB=LIB;C:–1.0.1c\dist\lib

• If you are using MSYS2/MSYS-shell, then: add the bin, include, lib folders to your compilation environment:

$ export PATH="$PATH:/c/openssl-1.0.1c/dist/bin"
$ export INCLUDE="$INCLUDE:/c/openssl-1.0.1c/dist/include"
$ export LIB="$LIB:/c/openssl-1.0.1c/dist/lib"

When you now run Qt's configure.exe openssl should be detected, and Qt links against the libraries.