Qt wiki will be updated on October 12th 2023 starting at 11:30 AM (EEST) and the maintenance will last around 2-3 hours. During the maintenance the site will be unavailable.
Build Qt for Tizen Developer Device
Jump to navigation
Jump to search
| This article may require cleanup to meet the Qt Wiki's quality standards. Reason: Auto-imported from ExpressionEngine. Please improve this article if you can. Remove the {{cleanup}} tag and add this page to Updated pages list after it's clean. |
[toc align_right="yes" depth="2"]
How to build Qt 4.8.1 for Tizen 1.0 Larkspur on RD-210
Overview
This article demonstrates how to build Qt 4.8.1 in Scratchbox2 ("SBS") and copy the files over to Tizen 1.0 Larkspur Ref.Device-210 (RD-210) for testing. Be aware that this does not include any source code changes, so the build might still need lots of work (and porting) for it to become fully usable.
How-to
- Install SBS: https://source.tizen.org/platform/development-sbs
- Install the Tizen SDK: https://developer.tizen.org/sdk (alternatively, get "sdb" through some other means)
- Get the Qt sources: http://releases.qt.io/qt4/source/qt-everywhere-opensource-src-4.8.1.tar.gz
- Unpack the sources somewhere: tar xzvf qt-everywhere-opensource-src-4.8.1.tar.gz
- Run "sbs -e" and then run "./configure -opensource -confirm-license" inside the extracted folder
- Run: make
- Run: mkdir tmp && INSTALL_ROOT=$(pwd)/tmp/ make install
- Pack up everything: cd tmp && tar czvf ../qt_tizen.tgz *
- Copy it to the device: sdb push ../qt_tizen.tgz /root/
- Get a shell and extract it: sdb shell && tar xzvf /root/qt_tizen.tgz -C /
After that, you should be able to run it using /usr/local/Trolltech/Qt-4.8.1/bin/qtdemo