Qt wiki will be updated on October 12th 2023 starting at 11:30 AM (EEST) and the maintenance will last around 2-3 hours. During the maintenance the site will be unavailable.
AML8726-M: Difference between revisions
No edit summary |
No edit summary |
||
| Line 25: | Line 25: | ||
== Device Information == | == Device Information == | ||
The AML8726-M is made by | The AML8726-M is made by "Amlogic Inc":http://amlogic.com. | ||
* | * "AML8726-M device is designed for the tablet and MID applications. It integrates a power CPU, a 2D/3D graphics subsystem and a state-of-the arts video decoding engine with all major peripherals to form the ultimate multimedia SoC." | ||
"1":http://www.amlogic.com/product02.htm Amlogic product information | |||
It's used in the Vivaldi tablet (based on zenithink c71) which uses Plasma Active as it's UI. | It's used in the Vivaldi tablet (based on zenithink c71) which uses Plasma Active as it's UI. | ||
| Line 33: | Line 34: | ||
=== Software === | === Software === | ||
Amlogic appears to be primarily focusing on Android support for this board. Much of the software stack is documented on their | Amlogic appears to be primarily focusing on Android support for this board. Much of the software stack is documented on their "openlinux wiki":http://openlinux.amlogic.com/wiki/index.php/Arm. You can download the rootfs from "here":http://openlinux.amlogic.com/download/linux/ARM/filesystem/ and the kernel from "here":http://openlinux.amlogic.com/download/linux/ARM/kernel/. | ||
== Qt5 eglfs/QPA == | == Qt5 eglfs/QPA == | ||
If you have v-sync problem use this workaround | If you have v-sync problem use this workaround | ||
http://forum.qt.io/viewthread/17930/ | |||
=== Toolchain === | === Toolchain === | ||
| Line 47: | Line 49: | ||
=== Compiling Qt5 === | === Compiling Qt5 === | ||
<code> | <code> | ||
$ mkdir build && cd build | |||
$ export QTSRCDIR=<path_to_qt5> # top level qt5.git and not qtbase | |||
$ export TOOLCHAIN_PATH=<path_to_toolchain> # see section above | |||
$ export SYSROOT=<path_to_rootfs> | |||
$ export PREFIX=<install_path_on_target> | |||
$ $QTSRCDIR/configure -device linux-arm-amlogic-8726M-g++ -force-pkg-config -device-option CROSS_COMPILE=$TOOLCHAIN_PATH/arm-2010q1/bin/arm-none-linux-gnueabi- -sysroot $SYSROOT -prefix $PREFIX -make libs -opensource -confirm-license | |||
$ make module-qtbase module-qtdeclarative | |||
$ make install # will install Qt into the $SYSROOT/$PREFIX | |||
Revision as of 09:47, 25 February 2015
AML8726-M
| Architecture | ARMv7 |
|---|---|
| CPU | ARM Cortex A-9 (1Ghz) |
| RAM | 512MB |
| GPU | Mali 400-M |
| OpenGL | OpenGL ES 2.0 |
| Qt 5.0 (eglfs/QPA) | Supported, with OpenGL ES 2.0 |
Device Information
The AML8726-M is made by "Amlogic Inc":http://amlogic.com.
- "AML8726-M device is designed for the tablet and MID applications. It integrates a power CPU, a 2D/3D graphics subsystem and a state-of-the arts video decoding engine with all major peripherals to form the ultimate multimedia SoC."
"1":http://www.amlogic.com/product02.htm Amlogic product information
It's used in the Vivaldi tablet (based on zenithink c71) which uses Plasma Active as it's UI.
Software
Amlogic appears to be primarily focusing on Android support for this board. Much of the software stack is documented on their "openlinux wiki":http://openlinux.amlogic.com/wiki/index.php/Arm. You can download the rootfs from "here":http://openlinux.amlogic.com/download/linux/ARM/filesystem/ and the kernel from "here":http://openlinux.amlogic.com/download/linux/ARM/kernel/.
Qt5 eglfs/QPA
If you have v-sync problem use this workaround http://forum.qt.io/viewthread/17930/
Toolchain
We are using the Code Soucery 2011.09 release, available here:
https://sourcery.mentor.com/sgpp/lite/arm/portal/release2029
Compiling Qt5
$ mkdir build && cd build
$ export QTSRCDIR=<path_to_qt5> # top level qt5.git and not qtbase
$ export TOOLCHAIN_PATH=<path_to_toolchain> # see section above
$ export SYSROOT=<path_to_rootfs>
$ export PREFIX=<install_path_on_target>
$ $QTSRCDIR/configure -device linux-arm-amlogic-8726M-g++ -force-pkg-config -device-option CROSS_COMPILE=$TOOLCHAIN_PATH/arm-2010q1/bin/arm-none-linux-gnueabi- -sysroot $SYSROOT -prefix $PREFIX -make libs -opensource -confirm-license
$ make module-qtbase module-qtdeclarative
$ make install # will install Qt into the $SYSROOT/$PREFIX